MDO vs Marine Plywood? | Boating Forum - iboats Boating Forums
2010年7月3日 · Given this there looks to be a good compromise which is MDO (Medium Density Overlay) is used by the highway dept for signs and I understand lasts years in extreme weather. I checked MDO at Home Depot and it's 1/2 he cost of marine plywood, the 1/2 has 5 plys so seems to be pretty strong and by looking at the edges there doesn't seem to be any ...
MDO plywood for transom | Page 2 - iboats Boating Forums
2009年12月1日 · Re: MDO plywood for transom MDO (medium density overlay) is exterior plywood and should not be confused with MDF (medium density fiberboard) or OSB (oriented strand board). MDF and OSB are fine for certain applications in home building, but I would not use either of them on a boat. I think...
making your own marine plywood out of home depot plywood??
2013年10月31日 · Re: making your own marine plywood out of home depot plywood?? To replace the flooring on a pontoon boat is a 1 week full time job. If you're working weekends, it might take 4 weekends working hard. Since it's so time consuming, there's no reason to skim on materials. My pontoon is a 1985 model, and it still has the original marine plywood on it.
arauco ply | Boating Forum - iboats Boating Forums
2013年1月6日 · There are 2 Arauco plywoods to choose from at Home Depot. One is the Pine Cabinet panel. This is not the one you want. The one you want is the sanded ACX Panel. Here's a link, if your local store has any: AraucoPly Sanded ACX Panel 3/4 …
Painting MDO Plywood? | Page 2 - iboats Boating Forums
2014年1月4日 · Original seats were MDO plywood, appeared to be painted with an oil based paint w/o primer. Held up well for 30+ years. I re-painted one of these with good quality oil based paint (with out primer) and that (applied over a well aged MDO surface) is holding up well.
MDO plywood for transom - iboats Boating Forums
2009年12月1日 · Re: MDO plywood for transom MDO (Medium Density Oriented Strand) board is now made with water resistant glues and could be used except it is still not rated for spans over 18". Forget that black diamond on your tape measure. Glassing it won't add enough strength to it for a transom with a large motor (300-400lb).
making your own marine plywood out of home depot plywood??
2013年10月31日 · Re: making your own marine plywood out of home depot plywood?? Marine plywood is 125.00 in my area, so I bought a 4x8 3/4 medium density overlay (mdo) for 50.00. It has far fewer voids than exterior ply, waterproof glue, and a beautiful one side finish.
making your own marine plywood out of home depot plywood??
2013年10月31日 · Re: making your own marine plywood out of home depot plywood?? I just use a scraper, sometimes cardboard and pour my epoxy on the wood and then spread it around. And I used epoxy to fix up some old wood (wood was in overall good cond, and and oddball size), it had rotted a little in some of the ends/corners, but it had fully dried out.
Painting MDO Plywood? | Boating Forum - iboats Boating Forums
2014年1月4日 · Planning to use new MDO plywood for decking over the bow section of my boat. Original seats were MDO plywood, appeared to be painted with an oil based paint w/o primer. Held up well for 30+ years. I re-painted one of these with good quality oil based paint (with out primer) and that (applied over a well aged MDO surface) is holding up well.
Pressure treated plywood verses marine grade? - Boating Forum
2012年8月2日 · SuperPly from Roseburg lumber is the stuff that uses waterproof glue. That's just for your info and not a recommendation. I always just go with ACX fir plywood from Home Depot. 5/8 is plenty thick but if you're going to glass it, drop back to 1/2" and that will keep you from having to adjust things due to the added deck height.
跳至内容